Contemporary abstract acrylic paintings often display a wide variety of special effects, especially when the images are abstract. Think of Jackson Pollock, Morris Louis, and Helen Frankenthaler artworks and effects using acrylic paint.
Acrylic pour art for sale: what is the technique
Pouring is to smoothen out the uneven texture. It is by which you can get marbled effects, deep glazes, and add abstracts. Pour and paint is a simple technique, but for many, it is not easy. There are two categories for pouring acrylic paint: coated spills and wash spills.
The following helpful tips and tricks can help you explore and resolve the most common pouring problems. Let us start with intuitive pouring to get you into the spirit of this free-flowing art of healing.
Tips for coated spills
A coated pour can look like oil paint. It will intensify the colors because glossy folders reflect light. Coated spills generally use a combination of acrylic paint and medium, with little or no addition of water. The paint creates a fluid shape or layer that sits on the surface of the paint, as in Jackson Pollack's layered drips and high-gloss finishes. For best results, use pouring medium and keep water additions less than 40%.
Cast media come in thick and fine viscosities. Each will produce different effects. When determining quantities, a good rule of thumb is to plan for approximately 2 ounces of thin pour medium to cover an 8 "x 10" (20 cm x 20 cm) surface and three ounces for thicker pour media.
Avoid adding water randomly to thin casting media. Try using the medium alone first to determine if it is necessary to add water
Allow excess medium to spill over the sides of the paint surface by propping up the surface with containers or blocks at all four corners
Use a leveling device to make sure the pour will stay level while it dries
Use a rigid substrate to prevent sagging while pouring acrylic paint. If it is a stretched canvas, make sure to hold the center to prevent it from sagging
Before pouring, apply a stain sealer, then prime with gesso. This will prevent stains from passing through the surface into the poured layer
Tips for washing
A wash pour resembles a watercolor and will mute colors as it uses large quantities of water to thin the acrylic. This encourages the abstract acrylic painting to sink into the surface of the painting, as in Helen Frankenthaler's stained canvas effects.
For best results, do not use any medium
Strongly dilute the paint with water, at least a 1-1 ratio
Consider the effect that surface absorption will have on the result
A wash on matt, absorbent surfaces, such as watercolor paper, will soak the surface to produce a spot of uniform color
Change the surface absorption by adding acrylic paste or gel before starting to pour acrylic paint
Try to minimize handling of the part. Instead, let the paint and water move on their own as they dry.
Some exciting effects of washing often arise from coincidences
Pour and paint acrylics will offer more color intensity in washes than heavy acrylics
You can also substitute acrylic inks, high-flow acrylics, and airbrush colors in most wash techniques for alternative effects.
Modern colors are used for the washes, maintaining the intensity of the bright color
Want to find out more about acrylic paints? Check out acrylic pour art for sale to see some fun in action and some ways to match poured paint with glazing and patterns.